Hytera Call tones to sound like Sepura TETRA radio's

Hello All,

After wanting the sepura tones after having the moto tones I though I'd reach out to the community for help with this. One member Scott (Havent put his full name just incase he wishes to remain semi-anonomous) has found the Sepura Technical manual for TETRA terminals and on one of the pages there is the tone frequency's and duration. These roughly can be inputted into the Hytera CPS software. screenshots are below.





Instructions


1: Open the CPS and read the radio.



2: On the side menu open the radio then go to Common -> User defined tones and create 2 new tones and call them "Sepura Call Close" and "Sepura Call Open"




3: Open the Sepura Call Clear tone and input these values,




4: For the call open tone add these values instead,



5: Write these values to the radio then when the radio has turned back on go to Menu -> Settings -> Radio Set -> Tones -> Private ring and set the call open tone there. then go back to the menu and go to Group call and set the call open tone aswell. Once set go to Call End and set the tone to Sepura Call Close there.

6: Once set try it out